Eaton SD53-220-R 22 uH SMD Power Inductor
Eaton SD53-220-R 22 uH SMD Power Inductor

Eaton SD53-220-R 22 uH SMD Power Inductor

Share
SD53-220-R: shielded drum core inductor, 22 uH , 0.81 A Irms, Isat 0.94 A, DCR 179 mOhm.
    • Product Details
    • Download

    Eaton SD53-220-R 22 uH SMD Power Inductor

    SD53-220-R at a glance: shielded drum core inductor, 22 uH , 0.81 A Irms, Isat 0.94 A, DCR 179 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD53-220-R
    Inductance22 uH
    DCR typical @ +20 °C179 mOhm
    DCR maximum @ +20 °C208 mOhm
    Irms (DC, 40 °C rise)0.81 A
    Isat0.94 A
    K-factor10
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4149

    Mechanical Dimensions & Pad Layout

    SD53-220-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4149: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.

    At 0.81 A the winding dissipates about 0.117 W in copper using the typical DCR of 179 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 9.72 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 10 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD53 family this is value 8 of 12, in a range from 1.1 uH to 100 uH.

    Series Positioning

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: desktop computers; notebook and laptop regulators; led and white led drivers; digital cameras, media devices; battery power systems.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products