
| Parameter | Value |
|---|---|
| Orderable part number | SD6020-100-R |
| Inductance | 9.7 uH |
| DCR typical @ +20 °C | 103300 mOhm |
| DCR maximum @ +20 °C | 124000 mOhm |
| Irms (DC, 40 °C rise) | 1.39 A |
| Isat | 1.2 A |
| K-factor | 18.1 |
| Package | 6 x 6 x 2 mm |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4144 |

Drawing reproduced from Eaton Technical Data 4144: outline with
rated mm dimensions, pad layout and marking.
A shielded drum core inductor: the winding sits on a drum-shaped ferrite core and a shield sleeve closes the magnetic path around it. That is what keeps the radiated field low enough to place the part next to other circuitry.
At 1.39 A the winding dissipates about 200 W in copper using the typical DCR of 103300 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 6.98 uJ at the saturation point, which is the energy available to bridge a load step.
The K-factor of 18.1 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the SD6020 family this is value 6 of 18, in a range from 1.99 uH to 94 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd