Eaton SD8328-330-R 31.9 uH SMD Power Inductor
Eaton SD8328-330-R 31.9 uH SMD Power Inductor

Eaton SD8328-330-R 31.9 uH SMD Power Inductor

Share
SD8328-330-R: shielded drum core inductor, 31.9 uH , 1.45 A Irms, Isat 1.4 A, DCR 120000 mOhm.
    • Product Details
    • Download

    Eaton SD8328-330-R 31.9 uH SMD Power Inductor

    SD8328-330-R at a glance: shielded drum core inductor, 31.9 uH , 1.45 A Irms, Isat 1.4 A, DCR 120000 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSD8328-330-R
    Rated inductance33 uH
    OCL (open circuit inductance)31.9 uH
    DCR typical @ +20 °C120000 mOhm
    DCR maximum @ +20 °C156000 mOhm
    Irms (DC, 40 °C rise)1.45 A
    Isat1.4 A
    K-factor3.3
    Package9.5 x 8.3 x 3 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4140

    Dimensions and Pad Layout

    SD8328-330-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4140: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.

    At 1.45 A the winding dissipates about 252 W in copper using the typical DCR of 120000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 31.3 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 3.3 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD8328 family this is value 8 of 11, in a range from 2.7 uH to 97 uH.

    Series Positioning

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: buck or boost inductor; noise filtering output filter chokes; notebook and laptop power/display; lcd monitors/displays/televisions; battery chargers, lcd bias supplies.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products