Eaton SD8328-680-R 64.2 uH Drum Core Inductor 220000 mOhm
Eaton SD8328-680-R 64.2 uH Drum Core Inductor 220000 mOhm

Eaton SD8328-680-R 64.2 uH Drum Core Inductor 220000 mOhm

Share
SD8328-680-R: shielded drum core inductor, 64.2 uH , 0.98 A Irms, Isat 1 A, DCR 220000 mOhm.
    • Product Details
    • Download

    Eaton SD8328-680-R 64.2 uH Drum Core Inductor 220000 mOhm

    SD8328-680-R at a glance: shielded drum core inductor, 64.2 uH , 0.98 A Irms, Isat 1 A, DCR 220000 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSD8328-680-R
    Rated inductance68 uH
    OCL (open circuit inductance)64.2 uH
    DCR typical @ +20 °C220000 mOhm
    DCR maximum @ +20 °C286000 mOhm
    Irms (DC, 40 °C rise)0.98 A
    Isat1 A
    K-factor1.6
    Package9.5 x 8.3 x 3 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4140

    Outline Drawing

    SD8328-680-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4140: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 0.98 A the winding dissipates about 211 W in copper using the typical DCR of 220000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 32.1 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 1.6 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD8328 family this is value 10 of 11, in a range from 2.7 uH to 97 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: buck or boost inductor; noise filtering output filter chokes; notebook and laptop power/display; lcd monitors/displays/televisions; battery chargers, lcd bias supplies.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products