Eaton SD8350-150-R 13.6 uH Shielded Inductor, 2.3 A
Eaton SD8350-150-R 13.6 uH Shielded Inductor, 2.3 A

Eaton SD8350-150-R 13.6 uH Shielded Inductor, 2.3 A

Share
SD8350-150-R: shielded drum core inductor, 13.6 uH , 2.3 A Irms, Isat 2.9 A, DCR 45000 mOhm.
    • Product Details
    • Download

    Eaton SD8350-150-R 13.6 uH Shielded Inductor, 2.3 A

    SD8350-150-R at a glance: shielded drum core inductor, 13.6 uH , 2.3 A Irms, Isat 2.9 A, DCR 45000 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD8350-150-R
    Rated inductance15 uH
    OCL (open circuit inductance)13.6 uH
    DCR typical @ +20 °C45000 mOhm
    DCR maximum @ +20 °C53000 mOhm
    Irms (DC, 40 °C rise)2.3 A
    Isat2.9 A
    K-factor5.3
    Package9.5 x 8.3 x 4.5 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4146

    Dimensions and Pad Layout

    SD8350-150-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4146: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A shielded drum core inductor: the winding sits on a drum-shaped ferrite core and a shield sleeve closes the magnetic path around it. That is what keeps the radiated field low enough to place the part next to other circuitry.

    At 2.3 A the winding dissipates about 238 W in copper using the typical DCR of 45000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 57.2 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 5.3 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD8350 family this is value 6 of 11, in a range from 1.5 uH to 99.7 uH.

    Positioning in the Range

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: server power; notebook and laptop power; high power led driver, portable devices; base station, telecom, and networking; battery chargers, ram power supply.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products