Eaton SDCH1V5040-471M-R 470 uH Semi-Shielded Inductor, 0.3 A
Eaton SDCH1V5040-471M-R 470 uH Semi-Shielded Inductor, 0.3 A

Eaton SDCH1V5040-471M-R 470 uH Semi-Shielded Inductor, 0.3 A

Share
SDCH1V5040-471M-R: semi-shielded power inductor, 470 uH ±20%, 0.3 A Irms, Isat 0.33 A, DCR 2750 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V5040-471M-R 470 uH Semi-Shielded Inductor, 0.3 A

    SDCH1V5040-471M-R at a glance: semi-shielded power inductor, 470 uH ±20%, 0.3 A Irms, Isat 0.33 A, DCR 2750 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDCH1V5040-471M-R
    Inductance470 uH ±20%
    FLL minimum (at Isat)244 uH
    DCR typical @ +20 °C2750 mOhm
    DCR maximum @ +20 °C3163 mOhm
    Irms (DC, 40 °C rise)0.3 A
    Isat0.33 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1033

    Outline Drawing

    SDCH1V5040-471M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1033: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    Semi-shielded construction is a compromise that works: enough magnetic material around the coil to keep radiated emissions low, but an open enough structure to keep the DCR and the cost down. Common on consumer and industrial DC-DC rails.

    At 0.3 A the winding dissipates about 0.247 W in copper using the typical DCR of 2750 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 25.6 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V5040 family this is value 16 of 17, in a range from 1 uH to 680 uH.

    What This Family Is For

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products