Eaton SDCH1V6045-821M-R 820 uH Semi-Shielded Inductor, 0.25 A
Eaton SDCH1V6045-821M-R 820 uH Semi-Shielded Inductor, 0.25 A

Eaton SDCH1V6045-821M-R 820 uH Semi-Shielded Inductor, 0.25 A

Share
SDCH1V6045-821M-R: semi-shielded power inductor, 820 uH ±20%, 0.25 A Irms, Isat 0.5 A, DCR 5200 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V6045-821M-R 820 uH Semi-Shielded Inductor, 0.25 A

    SDCH1V6045-821M-R at a glance: semi-shielded power inductor, 820 uH ±20%, 0.25 A Irms, Isat 0.5 A, DCR 5200 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCH1V6045-821M-R
    Inductance820 uH ±20%
    FLL minimum (at Isat)426 uH
    DCR typical @ +20 °C5200 mOhm
    DCR maximum @ +20 °C5980 mOhm
    Irms (DC, 40 °C rise)0.25 A
    Isat0.5 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1034

    Dimensions and Pad Layout

    SDCH1V6045-821M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1034: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    Semi-shielded construction is a compromise that works: enough magnetic material around the coil to keep radiated emissions low, but an open enough structure to keep the DCR and the cost down. Common on consumer and industrial DC-DC rails.

    At 0.25 A the winding dissipates about 0.325 W in copper using the typical DCR of 5200 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 102 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V6045 family this is value 18 of 19, in a range from 1 uH to 1000 uH.

    Where This Series Fits

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products