Eaton SDCH1V8040-150M-R 15 uH Power Inductor 50 mOhm
Eaton SDCH1V8040-150M-R 15 uH Power Inductor 50 mOhm

Eaton SDCH1V8040-150M-R 15 uH Power Inductor 50 mOhm

Share
SDCH1V8040-150M-R: semi-shielded power inductor, 15 uH ±20%, 2.8 A Irms, Isat 3.2 A, DCR 50 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V8040-150M-R 15 uH Power Inductor 50 mOhm

    SDCH1V8040-150M-R at a glance: semi-shielded power inductor, 15 uH ±20%, 2.8 A Irms, Isat 3.2 A, DCR 50 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDCH1V8040-150M-R
    Inductance15 uH ±20%
    FLL minimum (at Isat)7.8 uH
    DCR typical @ +20 °C50 mOhm
    DCR maximum @ +20 °C58 mOhm
    Irms (DC, 40 °C rise)2.8 A
    Isat3.2 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1035

    Mechanical Dimensions & Pad Layout

    SDCH1V8040-150M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1035: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    Semi-shielded construction is a compromise that works: enough magnetic material around the coil to keep radiated emissions low, but an open enough structure to keep the DCR and the cost down. Common on consumer and industrial DC-DC rails.

    At 2.8 A the winding dissipates about 0.392 W in copper using the typical DCR of 50 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 76.8 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V8040 family this is value 8 of 19, in a range from 1 uH to 1000 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products