Eaton SDCH1V8040-220M-R 22 uH Semi-Shielded Inductor, 2.5 A
Eaton SDCH1V8040-220M-R 22 uH Semi-Shielded Inductor, 2.5 A

Eaton SDCH1V8040-220M-R 22 uH Semi-Shielded Inductor, 2.5 A

Share
SDCH1V8040-220M-R: semi-shielded power inductor, 22 uH ±20%, 2.5 A Irms, Isat 2.8 A, DCR 70 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V8040-220M-R 22 uH Semi-Shielded Inductor, 2.5 A

    SDCH1V8040-220M-R at a glance: semi-shielded power inductor, 22 uH ±20%, 2.5 A Irms, Isat 2.8 A, DCR 70 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCH1V8040-220M-R
    Inductance22 uH ±20%
    FLL minimum (at Isat)11.4 uH
    DCR typical @ +20 °C70 mOhm
    DCR maximum @ +20 °C81 mOhm
    Irms (DC, 40 °C rise)2.5 A
    Isat2.8 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1035

    Mechanical Dimensions & Pad Layout

    SDCH1V8040-220M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1035: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A semi-shielded power inductor: the winding is covered by a magnetic resin rather than a full metal shield. That damps the fringing field substantially without the cost and mass of a closed shield, and it lets the part be built in a low profile.

    At 2.5 A the winding dissipates about 0.438 W in copper using the typical DCR of 70 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 86.2 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V8040 family this is value 9 of 19, in a range from 1 uH to 1000 uH.

    What This Family Is For

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products