Eaton SDCHA1V5020-1R0-R 1 uH AEC-Q200 Inductor, 4.1 A
Eaton SDCHA1V5020-1R0-R 1 uH AEC-Q200 Inductor, 4.1 A

Eaton SDCHA1V5020-1R0-R 1 uH AEC-Q200 Inductor, 4.1 A

Share
SDCHA1V5020-1R0-R: AEC-Q200 semi-shielded inductor, 1 uH ±30%, 4.1 A Irms, Isat 5 A, DCR 20 mOhm.
    • Product Details
    • Download

    Eaton SDCHA1V5020-1R0-R 1 uH AEC-Q200 Inductor, 4.1 A

    SDCHA1V5020-1R0-R at a glance: AEC-Q200 semi-shielded inductor, 1 uH ±30%, 4.1 A Irms, Isat 5 A, DCR 20 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSDCHA1V5020-1R0-R
    Inductance1 uH ±30%
    FLL minimum (at Isat)0.49 uH
    DCR typical @ +20 °C20 mOhm
    Irms (DC, 40 °C rise)4.1 A
    Isat5 A
    SRF typical137 MHz
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1095

    Dimensions and Pad Layout

    SDCHA1V5020-1R0-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1095: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    Automotive DC-DC stages ask for qualified construction and predictable saturation at the hot corner. This family provides both, with a semi-shielded body that keeps the profile low and the DCR moderate.

    At 4.1 A the winding dissipates about 0.336 W in copper using the typical DCR of 20 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 12.5 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 137 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the SDCHA1V5020 family this is value 1 of 11, in a range from 1 uH to 22 uH.

    Where This Series Fits

    The SDCA family is the automotive semi-shielded range: the same construction as the commercial parts, qualified to AEC-Q200 and characterised across the temperature range.

    • Qualification covers the part, not the module. The thermal design of the board is still the engineer’s job.
    • Typical applications: led lighting; advanced driver assistance systems (adas); adaptive cruise control (acc); collision avoidance; infotainment and cluster electronics.
    • Design note: use the maximum DCR at the hot corner for the loss budget, and Isat at the same temperature for the transient.

    Frequently Asked Questions

    What is the FLL column for?
    Full-load inductance at saturation current. Use it for the ripple calculation at maximum load rather than the zero-bias value.

    What does AEC-Q200 cover?
    The passive-component qualification regime: thermal shock, cycling, vibration, moisture and solderability. It qualifies the construction, not the board design.

    How do I check the hot corner?
    Use Isat at the highest operating temperature and the maximum DCR at that temperature. The room-temperature row is the optimistic one.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message