
| Parameter | Value |
|---|---|
| Orderable part number | SDCHA1V6045-1R2-R |
| Inductance | 1.2 uH ±20% |
| FLL minimum (at Isat) | 0.67 uH |
| DCR typical @ +20 °C | 10.5 mOhm |
| Irms (DC, 40 °C rise) | 7.5 A |
| Isat | 12.5 A |
| SRF typical | 90 MHz |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1096 |

Drawing reproduced from Eaton Technical Data ELX1096: outline with
rated mm dimensions, pad layout and marking.
A semi-shielded SMD inductor with automotive qualification. The data sheet quotes OCL, FLL, Irms, Isat, DCR and SRF, which is enough to close a converter design without extra characterisation.
At 7.5 A the winding dissipates about 0.591 W in copper using the typical DCR of 10.5 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 93.8 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 90 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the SDCHA1V6045 family this is value 2 of 20, in a range from 1 uH to 100 uH.
The SDCA family is the automotive semi-shielded range: the same construction as the commercial parts, qualified to AEC-Q200 and characterised across the temperature range.
What does AEC-Q200 cover?
The passive-component qualification regime: thermal shock, cycling, vibration, moisture and solderability. It qualifies the construction, not the board design.
Is the part fully shielded?
It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.
Is the part fully shielded?
It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd