
| Parameter | Value |
|---|---|
| Orderable part number | SDCHA1V6045-820-R |
| Inductance | 82 uH ±20% |
| FLL minimum (at Isat) | 45.9 uH |
| DCR typical @ +20 °C | 365 mOhm |
| Irms (DC, 40 °C rise) | 0.98 A |
| Isat | 1.5 A |
| SRF typical | 9 MHz |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1096 |

Drawing reproduced from Eaton Technical Data ELX1096: outline with
rated mm dimensions, pad layout and marking.
This part is used on body electronics and ADAS power rails where the inductor has to be qualified, shielded enough for EMC, and small enough to fit beside the regulator.
At 0.98 A the winding dissipates about 0.351 W in copper using the typical DCR of 365 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 92.2 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 9 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the SDCHA1V6045 family this is value 19 of 20, in a range from 1 uH to 100 uH.
The SDCA family is the automotive semi-shielded range: the same construction as the commercial parts, qualified to AEC-Q200 and characterised across the temperature range.
Is the part fully shielded?
It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.
Is the part fully shielded?
It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.
Is the part fully shielded?
It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd