
| Parameter | Value |
|---|---|
| Orderable part number | SDCHA1V8040-820-R |
| Inductance | 82 uH ±20% |
| FLL minimum (at Isat) | 45.9 uH |
| DCR typical @ +20 °C | 230 mOhm |
| Irms (DC, 40 °C rise) | 1.4 A |
| Isat | 1.6 A |
| SRF typical | 8.5 MHz |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1097 |

Drawing reproduced from Eaton Technical Data ELX1097: outline with
rated mm dimensions, pad layout and marking.
Automotive DC-DC stages ask for qualified construction and predictable saturation at the hot corner. This family provides both, with a semi-shielded body that keeps the profile low and the DCR moderate.
At 1.4 A the winding dissipates about 0.451 W in copper using the typical DCR of 230 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 105 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 8.5 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the SDCHA1V8040 family this is value 15 of 16, in a range from 1 uH to 100 uH.
The SDCA family is the automotive semi-shielded range: the same construction as the commercial parts, qualified to AEC-Q200 and characterised across the temperature range.
Is the part fully shielded?
It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.
How do I check the hot corner?
Use Isat at the highest operating temperature and the maximum DCR at that temperature. The room-temperature row is the optimistic one.
How do I check the hot corner?
Use Isat at the highest operating temperature and the maximum DCR at that temperature. The room-temperature row is the optimistic one.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd