Eaton SDCL1V2010-6R8M-R 6.8 uH SMD Inductor, Isat 0.75 A
Eaton SDCL1V2010-6R8M-R 6.8 uH SMD Inductor, Isat 0.75 A

Eaton SDCL1V2010-6R8M-R 6.8 uH SMD Inductor, Isat 0.75 A

Share
SDCL1V2010-6R8M-R: semi-shielded power inductor, 6.8 uH ±20%, 0.65 A Irms, Isat 0.75 A, DCR 550 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V2010-6R8M-R 6.8 uH SMD Inductor, Isat 0.75 A

    SDCL1V2010-6R8M-R at a glance: semi-shielded power inductor, 6.8 uH ±20%, 0.65 A Irms, Isat 0.75 A, DCR 550 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSDCL1V2010-6R8M-R
    Inductance6.8 uH ±20%
    FLL minimum (at Isat)3.54 uH
    DCR typical @ +20 °C550 mOhm
    DCR maximum @ +20 °C620 mOhm
    Irms (DC, 40 °C rise)0.65 A
    Isat0.75 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1029

    Mechanical Dimensions & Pad Layout

    SDCL1V2010-6R8M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1029: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A semi-shielded power inductor: the winding is covered by a magnetic resin rather than a full metal shield. That damps the fringing field substantially without the cost and mass of a closed shield, and it lets the part be built in a low profile.

    At 0.65 A the winding dissipates about 0.232 W in copper using the typical DCR of 550 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 1.91 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V2010 family this is value 8 of 10, in a range from 0.47 uH to 15 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products