
| Parameter | Value |
|---|---|
| Orderable part number | SDCL1V2510-6R8M-R |
| Inductance | 6.8 uH ±20% |
| FLL minimum (at Isat) | 3.54 uH |
| DCR typical @ +20 °C | 380 mOhm |
| DCR maximum @ +20 °C | 415 mOhm |
| Irms (DC, 40 °C rise) | 0.8 A |
| Isat | 0.9 A |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1030 |

Drawing reproduced from Eaton Technical Data ELX1030: outline with
rated mm dimensions, pad layout and marking.
This is a semi-shielded SMD power inductor, characterised with both typical and maximum DCR and with separate Irms and Isat columns. The construction is aimed at converters where the board is compact but not densely packed with magnetics.
At 0.8 A the winding dissipates about 0.243 W in copper using the typical DCR of 380 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 2.75 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SDCL1V2510 family this is value 8 of 10, in a range from 0.47 uH to 15 uH.
The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.
Why quote both Irms and Isat?
Because they describe different failure modes: overheating and saturation. A design has to satisfy both.
Why quote both Irms and Isat?
Because they describe different failure modes: overheating and saturation. A design has to satisfy both.
Can it be used in an automotive module?
The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd