Eaton SDCL1V3012-220M-R 22 uH Power Inductor 700 mOhm
Eaton SDCL1V3012-220M-R 22 uH Power Inductor 700 mOhm

Eaton SDCL1V3012-220M-R 22 uH Power Inductor 700 mOhm

Share
SDCL1V3012-220M-R: semi-shielded power inductor, 22 uH ±20%, 0.3 A Irms, Isat 0.42 A, DCR 700 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V3012-220M-R 22 uH Power Inductor 700 mOhm

    SDCL1V3012-220M-R at a glance: semi-shielded power inductor, 22 uH ±20%, 0.3 A Irms, Isat 0.42 A, DCR 700 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDCL1V3012-220M-R
    Inductance22 uH ±20%
    FLL minimum (at Isat)11.4 uH
    DCR typical @ +20 °C700 mOhm
    DCR maximum @ +20 °C805 mOhm
    Irms (DC, 40 °C rise)0.3 A
    Isat0.42 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1031

    Mechanical Dimensions & Pad Layout

    SDCL1V3012-220M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1031: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a semi-shielded SMD power inductor, characterised with both typical and maximum DCR and with separate Irms and Isat columns. The construction is aimed at converters where the board is compact but not densely packed with magnetics.

    At 0.3 A the winding dissipates about 0.063 W in copper using the typical DCR of 700 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 1.94 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V3012 family this is value 9 of 13, in a range from 1 uH to 100 uH.

    What This Family Is For

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products