Eaton SDCL1V3015-680M-R 68 uH SMD Inductor, Isat 0.33 A
Eaton SDCL1V3015-680M-R 68 uH SMD Inductor, Isat 0.33 A

Eaton SDCL1V3015-680M-R 68 uH SMD Inductor, Isat 0.33 A

Share
SDCL1V3015-680M-R: semi-shielded power inductor, 68 uH ±20%, 0.25 A Irms, Isat 0.33 A, DCR 2000 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V3015-680M-R 68 uH SMD Inductor, Isat 0.33 A

    SDCL1V3015-680M-R at a glance: semi-shielded power inductor, 68 uH ±20%, 0.25 A Irms, Isat 0.33 A, DCR 2000 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDCL1V3015-680M-R
    Inductance68 uH ±20%
    FLL minimum (at Isat)35.4 uH
    DCR typical @ +20 °C2000 mOhm
    DCR maximum @ +20 °C2300 mOhm
    Irms (DC, 40 °C rise)0.25 A
    Isat0.33 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1031

    Dimensions and Pad Layout

    SDCL1V3015-680M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1031: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A semi-shielded power inductor: the winding is covered by a magnetic resin rather than a full metal shield. That damps the fringing field substantially without the cost and mass of a closed shield, and it lets the part be built in a low profile.

    At 0.25 A the winding dissipates about 0.125 W in copper using the typical DCR of 2000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 3.7 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V3015 family this is value 12 of 13, in a range from 1 uH to 100 uH.

    Positioning in the Range

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products