Eaton SDCL1V4020-R47N-R 0.47 uH Semi-Shielded Inductor, 7 A
Eaton SDCL1V4020-R47N-R 0.47 uH Semi-Shielded Inductor, 7 A

Eaton SDCL1V4020-R47N-R 0.47 uH Semi-Shielded Inductor, 7 A

Share
SDCL1V4020-R47N-R: semi-shielded power inductor, 0.47 uH ±30%, 7 A Irms, Isat 10 A, DCR 15 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V4020-R47N-R 0.47 uH Semi-Shielded Inductor, 7 A

    SDCL1V4020-R47N-R at a glance: semi-shielded power inductor, 0.47 uH ±30%, 7 A Irms, Isat 10 A, DCR 15 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSDCL1V4020-R47N-R
    Inductance0.47 uH ±30%
    FLL minimum (at Isat)0.21 uH
    DCR typical @ +20 °C15 mOhm
    DCR maximum @ +20 °C20 mOhm
    Irms (DC, 40 °C rise)7 A
    Isat10 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1032

    Outline Drawing

    SDCL1V4020-R47N-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1032: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    The part is a wound coil with a magnetic coating: cheaper than a fully shielded part, quieter than an open drum. Check the Isat column for the transient and the Irms column for the thermal limit.

    At 7 A the winding dissipates about 0.735 W in copper using the typical DCR of 15 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 23.5 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V4020 family this is value 1 of 8, in a range from 0.47 uH to 10 uH.

    Where This Series Fits

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products