Eaton SDCL1V4030-220M-R 22 uH Semi-Shielded Inductor, 1 A
Eaton SDCL1V4030-220M-R 22 uH Semi-Shielded Inductor, 1 A

Eaton SDCL1V4030-220M-R 22 uH Semi-Shielded Inductor, 1 A

Share
SDCL1V4030-220M-R: semi-shielded power inductor, 22 uH ±20%, 1 A Irms, Isat 1.55 A, DCR 265 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V4030-220M-R 22 uH Semi-Shielded Inductor, 1 A

    SDCL1V4030-220M-R at a glance: semi-shielded power inductor, 22 uH ±20%, 1 A Irms, Isat 1.55 A, DCR 265 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSDCL1V4030-220M-R
    Inductance22 uH ±20%
    FLL minimum (at Isat)11.4 uH
    DCR typical @ +20 °C265 mOhm
    DCR maximum @ +20 °C305 mOhm
    Irms (DC, 40 °C rise)1 A
    Isat1.55 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1032

    Mechanical Dimensions & Pad Layout

    SDCL1V4030-220M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1032: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    Semi-shielded construction is a compromise that works: enough magnetic material around the coil to keep radiated emissions low, but an open enough structure to keep the DCR and the cost down. Common on consumer and industrial DC-DC rails.

    At 1 A the winding dissipates about 0.265 W in copper using the typical DCR of 265 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 26.4 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V4030 family this is value 10 of 17, in a range from 0.68 uH to 470 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products