Eaton SDCL1V4030-R68N-R 0.68 uH Power Inductor 11 mOhm
Eaton SDCL1V4030-R68N-R 0.68 uH Power Inductor 11 mOhm

Eaton SDCL1V4030-R68N-R 0.68 uH Power Inductor 11 mOhm

Share
SDCL1V4030-R68N-R: semi-shielded power inductor, 0.68 uH ±30%, 4.3 A Irms, Isat 8 A, DCR 11 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V4030-R68N-R 0.68 uH Power Inductor 11 mOhm

    SDCL1V4030-R68N-R at a glance: semi-shielded power inductor, 0.68 uH ±30%, 4.3 A Irms, Isat 8 A, DCR 11 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCL1V4030-R68N-R
    Inductance0.68 uH ±30%
    FLL minimum (at Isat)0.31 uH
    DCR typical @ +20 °C11 mOhm
    DCR maximum @ +20 °C15 mOhm
    Irms (DC, 40 °C rise)4.3 A
    Isat8 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1032

    Mechanical Dimensions & Pad Layout

    SDCL1V4030-R68N-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1032: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a semi-shielded SMD power inductor, characterised with both typical and maximum DCR and with separate Irms and Isat columns. The construction is aimed at converters where the board is compact but not densely packed with magnetics.

    At 4.3 A the winding dissipates about 0.203 W in copper using the typical DCR of 11 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 21.8 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V4030 family this is value 1 of 17, in a range from 0.68 uH to 470 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products