Eaton SDQ12-1R5-R Shielded Dual Winding Choke
Eaton SDQ12-1R5-R Shielded Dual Winding Choke

Eaton SDQ12-1R5-R Shielded Dual Winding Choke

Share
SDQ12-1R5-R: dual winding shielded inductor, 1.5 uH.
    • Product Details
    • Download

    Eaton SDQ12-1R5-R Shielded Dual Winding Choke

    SDQ12-1R5-R at a glance: dual winding shielded inductor, 1.5 uH.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDQ12-1R5-R
    Rated inductance1.5 uH
    OCL, parallel1.69 uH
    Irms, parallel1.69 A
    Isat, parallel2.34 A
    DCR, parallel typical87 mOhm
    Volt-time, parallel4.55 V-us
    OCL, series6.76 uH
    Irms, series0.847 A
    Isat, series1.17 A
    DCR, series typical348 mOhm
    Volt-time, series9.1 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    The Figures Explained

    Coupled windings on a shielded drum are used for interleaved converters and for ripple cancellation, where the coupling is the point rather than a side effect.

    Within the SDQ12 family this is item 4 of 15 in the Eaton catalogue.

    Positioning in the Range

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    Is the part shielded?
    Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message