Eaton SDQ12-680-R Dual Winding Inductor 68 uH
Eaton SDQ12-680-R Dual Winding Inductor 68 uH

Eaton SDQ12-680-R Dual Winding Inductor 68 uH

Share
SDQ12-680-R: dual winding shielded inductor, 68 uH.
    • Product Details
    • Download

    Eaton SDQ12-680-R Dual Winding Inductor 68 uH

    SDQ12-680-R at a glance: dual winding shielded inductor, 68 uH.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDQ12-680-R
    Rated inductance68 uH
    OCL, parallel68.9 uH
    Irms, parallel0.326 A
    Isat, parallel0.366 A
    DCR, parallel typical2.36 Ohm
    Volt-time, parallel29.1 V-us
    OCL, series276 uH
    Irms, series0.163 A
    Isat, series0.183 A
    DCR, series typical9.43 Ohm
    Volt-time, series58.1 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    The Figures Explained

    This is the low-profile shielded version of the dual winding drum: the two windings are brought out to separate pads so they can be paralleled, series-connected or used as a 1:1 transformer.

    Within the SDQ12 family this is item 11 of 15 in the Eaton catalogue.

    Where This Series Fits

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    How much coupling is there?
    The windings share the drum, so coupling is tight – close to 1 for the intended configurations. That is why parallel connection halves the inductance instead of leaving it unchanged.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message