Eaton SDQ12-8R2-R Dual Winding Drum Inductor
Eaton SDQ12-8R2-R Dual Winding Drum Inductor

Eaton SDQ12-8R2-R Dual Winding Drum Inductor

Share
SDQ12-8R2-R: dual winding shielded inductor, 8.2 uH.
    • Product Details
    • Download

    Eaton SDQ12-8R2-R Dual Winding Drum Inductor

    SDQ12-8R2-R at a glance: dual winding shielded inductor, 8.2 uH.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDQ12-8R2-R
    Rated inductance8.2 uH
    OCL, parallel8.41 uH
    Irms, parallel0.868 A
    Isat, parallel1.05 A
    DCR, parallel typical332 mOhm
    Volt-time, parallel10.2 V-us
    OCL, series33.6 uH
    Irms, series0.434 A
    Isat, series0.524 A
    DCR, series typical1.33 Ohm
    Volt-time, series20.3 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    What the Numbers Mean

    The shield closes the magnetic path around the drum, so the part can sit next to sensitive circuitry. The two windings share the core, which is what makes the parallel and series ratings differ by a factor of four rather than two.

    Within the SDQ12 family this is item 14 of 15 in the Eaton catalogue.

    Where This Series Fits

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    Is the part shielded?
    Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    How much coupling is there?
    The windings share the drum, so coupling is tight – close to 1 for the intended configurations. That is why parallel connection halves the inductance instead of leaving it unchanged.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message