Eaton SDQ25-102-R Dual Winding Drum Inductor
Eaton SDQ25-102-R Dual Winding Drum Inductor

Eaton SDQ25-102-R Dual Winding Drum Inductor

Share
SDQ25-102-R: dual winding shielded inductor, 1000 uH.
    • Product Details
    • Download

    Eaton SDQ25-102-R Dual Winding Drum Inductor

    SDQ25-102-R at a glance: dual winding shielded inductor, 1000 uH.

    Specification Table

    ParameterValue
    Orderable part numberSDQ25-102-R
    Rated inductance1000 uH
    OCL, parallel1008 uH
    Irms, parallel0.16 A
    Isat, parallel0.127 A
    DCR, parallel typical9.82 Ohm
    Volt-time, parallel117 V-us
    OCL, series4033 uH
    Irms, series0.08 A
    Isat, series0.063 A
    DCR, series typical39.3 Ohm
    Volt-time, series234 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    Reading the Data Sheet

    Coupled windings on a shielded drum are used for interleaved converters and for ripple cancellation, where the coupling is the point rather than a side effect.

    Within the SDQ25 family this is item 3 of 24 in the Eaton catalogue.

    What This Family Is For

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    Is the part shielded?
    Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message