Eaton SDQ25-151-R Shielded Dual Winding Choke
Eaton SDQ25-151-R Shielded Dual Winding Choke

Eaton SDQ25-151-R Shielded Dual Winding Choke

Share
SDQ25-151-R: dual winding shielded inductor, 150 uH.
    • Product Details
    • Download

    Eaton SDQ25-151-R Shielded Dual Winding Choke

    SDQ25-151-R at a glance: dual winding shielded inductor, 150 uH.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDQ25-151-R
    Rated inductance150 uH
    OCL, parallel150 uH
    Irms, parallel0.408 A
    Isat, parallel0.328 A
    DCR, parallel typical1.5 Ohm
    Volt-time, parallel45.2 V-us
    OCL, series601 uH
    Irms, series0.204 A
    Isat, series0.164 A
    DCR, series typical6 Ohm
    Volt-time, series90.4 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    What the Numbers Mean

    A dual winding shielded drum inductor: two identical windings on one drum core, wired in parallel for the low-inductance high-current rating or in series for four times the inductance at half the current.

    Within the SDQ25 family this is item 5 of 24 in the Eaton catalogue.

    Where This Series Fits

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    How much coupling is there?
    The windings share the drum, so coupling is tight – close to 1 for the intended configurations. That is why parallel connection halves the inductance instead of leaving it unchanged.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    How much coupling is there?
    The windings share the drum, so coupling is tight – close to 1 for the intended configurations. That is why parallel connection halves the inductance instead of leaving it unchanged.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message