Eaton SDQ25-330-R Dual Winding Drum Inductor
Eaton SDQ25-330-R Dual Winding Drum Inductor

Eaton SDQ25-330-R Dual Winding Drum Inductor

Share
SDQ25-330-R: dual winding shielded inductor, 33 uH.
    • Product Details
    • Download

    Eaton SDQ25-330-R Dual Winding Drum Inductor

    SDQ25-330-R at a glance: dual winding shielded inductor, 33 uH.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDQ25-330-R
    Rated inductance33 uH
    OCL, parallel33.8 uH
    Irms, parallel0.812 A
    Isat, parallel0.692 A
    DCR, parallel typical380 mOhm
    Volt-time, parallel21.5 V-us
    OCL, series135 uH
    Irms, series0.406 A
    Isat, series0.346 A
    DCR, series typical1.52 Ohm
    Volt-time, series42.9 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    The Figures Explained

    Coupled windings on a shielded drum are used for interleaved converters and for ripple cancellation, where the coupling is the point rather than a side effect.

    Within the SDQ25 family this is item 11 of 24 in the Eaton catalogue.

    Where This Series Fits

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    Is the part shielded?
    Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message