Eaton SDQ25-681-R Coupled Inductor, Parallel 680 uH
Eaton SDQ25-681-R Coupled Inductor, Parallel 680 uH

Eaton SDQ25-681-R Coupled Inductor, Parallel 680 uH

Share
SDQ25-681-R: dual winding shielded inductor, 680 uH.
    • Product Details
    • Download

    Eaton SDQ25-681-R Coupled Inductor, Parallel 680 uH

    SDQ25-681-R at a glance: dual winding shielded inductor, 680 uH.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDQ25-681-R
    Rated inductance680 uH
    OCL, parallel677 uH
    Irms, parallel0.197 A
    Isat, parallel0.155 A
    DCR, parallel typical6.45 Ohm
    Volt-time, parallel96 V-us
    OCL, series2710 uH
    Irms, series0.098 A
    Isat, series0.077 A
    DCR, series typical25.8 Ohm
    Volt-time, series192 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    The Figures Explained

    This is the low-profile shielded version of the dual winding drum: the two windings are brought out to separate pads so they can be paralleled, series-connected or used as a 1:1 transformer.

    Within the SDQ25 family this is item 18 of 24 in the Eaton catalogue.

    What This Family Is For

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    How much coupling is there?
    The windings share the drum, so coupling is tight – close to 1 for the intended configurations. That is why parallel connection halves the inductance instead of leaving it unchanged.

    Is the part shielded?
    Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message