Welcome to our company!
Eaton SR-5F-1.6A-AP 1.6 A 250 Vac Fast-Acting Subminiature Fuse
Share
pEaton SR-5F-1.6A-AP — 1.6 A, 250 V, fast-acting fuse, 50 A at rated voltage, 50 Hz interrupting./p
- Product Details
- Download
Eaton SR-5F-1.6A-AP 1.6 A 250 Vac Fast-Acting Subminiature Fuse
Eaton SR-5F-1.6A-AP 1.6 A 250 Vac Fast-Acting Subminiature Fuse belongs to the Eaton range. It carries 1.6 A, rated 250 Vac, uses a fast-acting element.
Technical Data
| Parameter | Rating |
|---|---|
| Parameter | Value |
| Orderable part number | SR-5F-1.6A-AP (-AP = 1,000 pcs ammo pack, 12.7 mm pitch) |
| Voltage rating | 250 Vac |
| Maximum power dissipation at 1 In | 528 mW |
| Dissipation at rating | 0.53 W |
| Agency | cULus E19180 (JDXY1, JDYX7) / PSE JET5766 |
| DC cold resistance, typical | 0.076 Ohm |
| Design standard | UL 248-14 |
| Typical voltage drop | 330 mV at rated current |
| Characteristic | Fast-acting (F) |
| Typical melting I2t | 6.9 A2s |
| Interrupting rating | 50 A at rated voltage, 50 Hz |
| Body | Radial leaded, fast-acting, plastic cap and base, UL 94V0 |
| Current rating | 1.6 A |
Design Notes
- Interrupting capability is 50 A at rated voltage, 50 Hz — confirm the circuit's prospective fault current stays below this.
- Fast element suits resistive and semiconductor loads rather than motors with high inrush.
- Because it opens within milliseconds, downstream semiconductors see less let-through energy.
- Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
- Do not upsize beyond 1.6 A to stop nuisance trips — fix the cause instead.
Where It Is Used
Typical places this fuse turns up:
- adapter
- appliance
- surge
Common Questions
What are the ratings of the SR-5F-1.6A-AP?
1.6 A continuous at 250 Vac, interrupting rating 50 A at rated voltage, 50 Hz.
Is the SR-5F-1.6A-AP fast-acting or time-delay?
It is fast-acting. Expect it to open quickly on overload.
Can the SR-5F-1.6A-AP be used on a higher fault-current circuit?
No — its interrupting rating is 50 A at rated voltage, 50 Hz. Choose a part whose breaking capacity exceeds the prospective fault current.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
