Eaton SR-5F-2.5A-AP 2.5 A 250 Vac Fast-Acting Subminiature Fuse
Eaton SR-5F-2.5A-AP 2.5 A 250 Vac Fast-Acting Subminiature Fuse

Eaton SR-5F-2.5A-AP 2.5 A 250 Vac Fast-Acting Subminiature Fuse

Share
pEaton SR-5F-2.5A-AP — 2.5 A, 250 V, fast-acting fuse, 50 A at rated voltage, 50 Hz interrupting./p
    • Product Details
    • Download

    Eaton SR-5F-2.5A-AP 2.5 A 250 Vac Fast-Acting Subminiature Fuse

    Built by Eaton, the SR-5F-2.5A-AP carries 2.5 A, rated 250 Vac, uses a fast-acting element.

    Technical Data

    ParameterRating
    ParameterValue
    Orderable part numberSR-5F-2.5A-AP (-AP = 1,000 pcs ammo pack, 12.7 mm pitch)
    Current rating2.5 A
    Typical DC cold resistance0.049 Ohm
    Design standardUL 248-14
    CharacteristicFast-acting (F)
    Interrupting rating50 A at rated voltage, 50 Hz
    Rated voltage250 Vac
    Typical voltage drop330 mV at rated current
    BodyRadial leaded, fast-acting, plastic cap and base, UL 94V0
    Maximum power dissipation at 1 In825 mW
    Typical melting I2t15 A2s
    Power dissipation0.82 W
    AgencycULus E19180 (JDXY1, JDYX7) / PSE JET5766

    Selection Notes

    • Interrupting capability is 50 A at rated voltage, 50 Hz — confirm the circuit's prospective fault current stays below this.
    • Fast element suits resistive and semiconductor loads rather than motors with high inrush.
    • Because it opens within milliseconds, downstream semiconductors see less let-through energy.
    • Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 2.5 A to stop nuisance trips — fix the cause instead.

    Typical Applications

    Engineers usually specify it for these duties:

    • EV
    • surge

    Q&A

    What are the ratings of the SR-5F-2.5A-AP?

    2.5 A continuous at 250 Vac, interrupting rating 50 A at rated voltage, 50 Hz.

    Is the SR-5F-2.5A-AP fast-acting or time-delay?

    It is fast-acting. Expect it to open quickly on overload.

    Can the SR-5F-2.5A-AP be used on a higher fault-current circuit?

    No — its interrupting rating is 50 A at rated voltage, 50 Hz. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message