Eaton SR-5F-7A-AP 7 A 125 Vac Fast-Acting Subminiature Fuse
Eaton SR-5F-7A-AP 7 A 125 Vac Fast-Acting Subminiature Fuse

Eaton SR-5F-7A-AP 7 A 125 Vac Fast-Acting Subminiature Fuse

Share
pEaton SR-5F-7A-AP — 7 A, 125 V, fast-acting fuse, 50 A at rated voltage, 50 Hz interrupting./p
    • Product Details
    • Download

    Eaton SR-5F-7A-AP 7 A 125 Vac Fast-Acting Subminiature Fuse

    Built by Eaton, the SR-5F-7A-AP carries 7 A, rated 125 Vac, uses a fast-acting element.

    Technical Data

    ParameterRating
    ParameterValue
    Orderable part numberSR-5F-7A-AP (-AP = 1,000 pcs ammo pack, 12.7 mm pitch)
    CharacteristicFast-acting (F)
    Design standardUL 248-14
    BodyRadial leaded, fast-acting, plastic cap and base, UL 94V0
    Voltage drop (typical)250 mV at rated current
    Current rating7 A
    AgencycULus E19180 (JDXY1, JDYX7) / PSE JET5766
    Typical DC cold resistance0.011 Ohm
    Maximum power dissipation at 1 In1750 mW
    Dissipation at rating1.75 W
    Voltage rating125 Vac
    Interrupting rating50 A at rated voltage, 50 Hz
    I2t, typical melting107 A2s

    Selection Notes

    • Interrupting capability is 50 A at rated voltage, 50 Hz — confirm the circuit's prospective fault current stays below this.
    • Fast element suits resistive and semiconductor loads rather than motors with high inrush.
    • Because it opens within milliseconds, downstream semiconductors see less let-through energy.
    • Working voltage must stay at or below 125 Vac; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 7 A to stop nuisance trips — fix the cause instead.

    Typical Applications

    Engineers usually specify it for these duties:

    • EV
    • adapter

    Q&A

    What are the ratings of the SR-5F-7A-AP?

    7 A continuous at 125 Vac, interrupting rating 50 A at rated voltage, 50 Hz.

    Is the SR-5F-7A-AP fast-acting or time-delay?

    It is fast-acting. Expect it to open quickly on overload.

    Can the SR-5F-7A-AP be used on a higher fault-current circuit?

    No — its interrupting rating is 50 A at rated voltage, 50 Hz. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message