Eaton SS-5-1.25A-AP 1.25 A 250 Vac Time-Delay Subminiature Fuse
Eaton SS-5-1.25A-AP 1.25 A 250 Vac Time-Delay Subminiature Fuse

Eaton SS-5-1.25A-AP 1.25 A 250 Vac Time-Delay Subminiature Fuse

Share
Eaton SS-5-1.25A-AP is a 1.25 A 250 Vac time-delay subminiature radial fuse, 35 A breaking, 12.8 A2s I2t.
    • Product Details
    • Download

    Eaton SS-5-1.25A-AP 1.25 A 250 Vac Time-Delay Subminiature Fuse

    SS-5-1.25A-AP at a glance: 1.25 A, 250 Vac, 35 A breaking, 12.8 A2s I2t, 62.4 mOhm cold - radial leaded, time-delay, rectangular in a UL 94V0 body.

    Core Specifications

    ParameterValue
    Orderable part numberSS-5-1.25A-AP (-AP = 1,000 pcs ammo pack, 12.7 mm pitch)
    Dissipation at rating0.12 W
    Current rating1.25 A
    BodyRadial leaded, time-delay, rectangular, plastic cap and base, UL 94V0
    On-state drop, typical93.5 mV at rated current
    Design standardIEC 60127-3 sheet 4
    CharacteristicTime-delay (T)
    Cold resistance (typical)62.4 mOhm
    Interrupting rating35 A at rated voltage, 50 Hz
    Voltage rating250 Vac
    I2t, typical melting12.8 A2s
    AgencyUL E19180 (JDYX2/JDYX8) / VDE 40015513 / CCC / KC / SEMKO / PSE+JET

    At 1.25 A

    • Heat. 93.5 mV at 1.25 A is 0.12 W. The 62.4 mOhm cold figure predicts 0.10 W, so the element sits above its 20 C value - leave margin in a closed adapter.
    • Inrush. A 2 x 1.25 A, 5 ms pulse spends 31.2 mJ, or 0.24 % of the 12.8 A2s melting integral. That headroom is the point of the T characteristic.
    • Opening. 1.5 In for 60 minutes without opening, 2.1 In within 2 minutes, 2.75 In in 400 ms to 10 s, 10 In under 150 ms.
    • Voltage. 250 Vac is the ceiling. Above that the arc quenches too slowly for a plastic body.
    • 0.5 A to 2 A band. 1.25 A is the volume centre of this series - adapters, set-top boxes and small appliances. The 12.8 A2s integral is large enough to ride a normal inrush and still small enough to protect a winding.
    • Neighbours. One step down is SS-5-1A-AP at 1 A, one step up is SS-5-1.6A-AP at 1.6 A. I2t goes 7.4 to 23 A2s across that range, so the choice is an inrush-margin decision rather than a resolution one.

    Procurement Notes

    • Order SS-5-1.25A-AP - -AP is 1,000 pieces in an ammo pack at 12.7 mm pitch. -BK is 200 in a polybag (4.3 mm leads), -BK2 200 with 21 mm leads.
    • Approvals: UL E19180 (JDYX2/JDYX8) / VDE 40015513 / CCC / KC / SEMKO / PSE+JET.
    • The purchasing code carries the packaging suffix; the bare part number is not a complete order line.
    • Same element as the cartridge equivalent in this current - only the termination differs.

    Frequently Asked Questions

    Is it halogen free?
    Yes, and RoHS compliant.

    What is the body material?
    Plastic cap and base rated UL 94V0, with tin-plated copper leads.

    Is the whole part number required?
    Yes. Eaton's ordering code includes the packaging suffix - the bare rating is not a complete order line.

    Design note: values are typical unless identified as ratings. Verify the current Eaton data sheet 2621 before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products