Eaton TL1011V2-R080-R 80 nH Trans-Inductor, Kps 0.94
Eaton TL1011V2-R080-R 80 nH Trans-Inductor, Kps 0.94

Eaton TL1011V2-R080-R 80 nH Trans-Inductor, Kps 0.94

Share
TL1011V2-R080-R: trans-inductor regulator coupled inductor, Lpri 80 nH, Lsec 80 nH, FLL 57 nH, Kps 0.94, Irms 70 A.
    • Product Details
    • Download

    Eaton TL1011V2-R080-R 80 nH Trans-Inductor, Kps 0.94

    TL1011V2-R080-R at a glance: trans-inductor regulator coupled inductor, Lpri 80 nH, Lsec 80 nH, FLL 57 nH, Kps 0.94, Irms 70 A.

    Ratings at a Glance

    ParameterValue
    Orderable part numberTL1011V2-R080-R
    Primary inductance Lpri (terminals 3-4)80 nH ±10%
    Secondary inductance Lsec (terminals 1-2)80 nH ±10%
    FLL minimum at Isat157 nH
    DCR primary @ +20 °C0.6 mOhm
    DCR secondary @ +20 °C0.15 mOhm
    Irms secondary (40 °C rise)70 A
    Isat1 (20 % rolloff @ +25 °C)143 A
    Isat2 (20 % rolloff @ +100 °C)122 A
    Isat3 (20 % rolloff @ +125 °C)114 A
    K-factor (Bp-p = K x L x dI x 10^-3)340
    Coupling coefficient Kps0.94
    Package9.6 x 6.4 mm, 11.0 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1154

    Mechanical Dimensions & Pad Layout

    TL1011V2-R080-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1154: outline views
    with rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    Three numbers describe this part and they are not interchangeable. Lpri is what the phase sees; Lsec is the winding that forms the shared loop; FLL is the inductance left when the phase reaches Isat1. Sizing a TLVR on the wrong one is the usual way these designs go wrong.

    The secondary winding drops about 10.5 mV at its 70 A rating and dissipates roughly 0.735 W there. That is the loss the loop carries on top of the phase windings.

    The K-factor turns the applied ripple into a flux swing through Bp-p = K x L x delta-I, with L taken at the operating point. That amplitude, not the DC current, is what the core-loss curve is read against.

    With Kps at 0.94 the two windings share the flux almost completely; the fraction that does not link is what shows up as leakage inductance in the phase.

    Within the TL1011V2 family this is value 2 of 7, in a range from 70 to 170 nH.

    Series Positioning

    The TL and TLP families cover 70 nH to 200 nH of primary inductance in 9.6 x 6.4 mm, 10 x 6 mm and 12 x 6 mm bodies, with the secondary winding equal to the primary and a coupling coefficient between 0.91 and 0.95.

    • The secondary loop is part of the power stage. Layout inductance in that loop shows up directly as a slower transient, so keep the return path short and symmetric between phases.
    • Typical applications: multi-phase and vcore regulators; voltage regulator modules (vrms) and high power density vrms; server and desktop; central processing unit (cpu); graphics processing unit (gpu).
    • Design note: ripple from FLL, transient from Kps, loss from the primary DCR at the phase current. The secondary DCR only carries the difference current.

    Frequently Asked Questions

    Which inductance do I use for the ripple calculation?
    FLL, the full-load inductance, because that is the value at the current the converter actually runs at. OCL is the zero-bias figure and overstates the inductance at load; using it makes the ripple look smaller than it is.

    Which inductance do I use for the ripple calculation?
    FLL, the full-load inductance, because that is the value at the current the converter actually runs at. OCL is the zero-bias figure and overstates the inductance at load; using it makes the ripple look smaller than it is.

    What is a good coupling coefficient?
    Higher is better for transient response, but it also couples more of the ripple between phases. Values around 0.9 to 0.95 are typical; below about 0.85 the loop stops doing much work and the part behaves like a plain inductor with extra terminals.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products