Eaton TL1212V2-R120-R 120 nH Coupled TLVR Inductor
Eaton TL1212V2-R120-R 120 nH Coupled TLVR Inductor

Eaton TL1212V2-R120-R 120 nH Coupled TLVR Inductor

Share
TL1212V2-R120-R: trans-inductor regulator coupled inductor, Lpri 120 nH, Lsec 120 nH, FLL 86 nH, Kps 0.95, Irms 75 A.
    • Product Details
    • Download

    Eaton TL1212V2-R120-R 120 nH Coupled TLVR Inductor

    TL1212V2-R120-R at a glance: trans-inductor regulator coupled inductor, Lpri 120 nH, Lsec 120 nH, FLL 86 nH, Kps 0.95, Irms 75 A.

    Specification Table

    ParameterValue
    Orderable part numberTL1212V2-R120-R
    Primary inductance Lpri (terminals 3-4)120 nH ±10%
    Secondary inductance Lsec (terminals 1-2)120 nH ±10%
    FLL minimum at Isat186 nH
    DCR primary @ +20 °C0.37 mOhm
    DCR secondary @ +20 °C0.125 mOhm
    Irms secondary (40 °C rise)75 A
    Isat1 (20 % rolloff @ +25 °C)108 A
    Isat2 (20 % rolloff @ +100 °C)93 A
    Isat3 (20 % rolloff @ +125 °C)86 A
    K-factor (Bp-p = K x L x dI x 10^-3)308
    Coupling coefficient Kps0.95
    Package12.0 x 6.0 mm, 12.1 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1159

    Mechanical Dimensions & Pad Layout

    TL1212V2-R120-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1159: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    Three numbers describe this part and they are not interchangeable. Lpri is what the phase sees; Lsec is the winding that forms the shared loop; FLL is the inductance left when the phase reaches Isat1. Sizing a TLVR on the wrong one is the usual way these designs go wrong.

    The secondary winding drops about 9.38 mV at its 75 A rating and dissipates roughly 0.703 W there. That is the loss the loop carries on top of the phase windings.

    The K-factor turns the applied ripple into a flux swing through Bp-p = K x L x delta-I, with L taken at the operating point. That amplitude, not the DC current, is what the core-loss curve is read against.

    With Kps at 0.95 the two windings share the flux almost completely; the fraction that does not link is what shows up as leakage inductance in the phase.

    Within the TL1212V2 family this is value 4 of 6, in a range from 70 to 170 nH.

    Positioning in the Range

    The TL and TLP families cover 70 nH to 200 nH of primary inductance in 9.6 x 6.4 mm, 10 x 6 mm and 12 x 6 mm bodies, with the secondary winding equal to the primary and a coupling coefficient between 0.91 and 0.95.

    • The secondary loop is part of the power stage. Layout inductance in that loop shows up directly as a slower transient, so keep the return path short and symmetric between phases.
    • Typical applications: multi-phase and vcore regulators; voltage regulator modules (vrms) and high power density vrms; server and desktop; central processing unit (cpu); graphics processing unit (gpu).
    • Design note: ripple from FLL, transient from Kps, loss from the primary DCR at the phase current. The secondary DCR only carries the difference current.

    Frequently Asked Questions

    Can I use this part as an ordinary inductor?
    Only if you leave the secondary open. With the secondary connected to the other phases the part is part of a loop and its effective inductance depends on what the rest of the loop is doing.

    Which inductance do I use for the ripple calculation?
    FLL, the full-load inductance, because that is the value at the current the converter actually runs at. OCL is the zero-bias figure and overstates the inductance at load; using it makes the ripple look smaller than it is.

    What does a trans-inductor actually do that a normal inductor does not?
    It couples the phases. The secondary windings form a closed loop, so a current step in one phase induces a voltage that drives current out of the other phases immediately. The converter responds faster than the control loop alone could manage, and the output capacitor sees a smaller excursion.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products