Eaton UP1B-101-R 100 uH UNI-PAC Power Inductor
Eaton UP1B-101-R 100 uH UNI-PAC Power Inductor

Eaton UP1B-101-R 100 uH UNI-PAC Power Inductor

Share
UP1B-101-R: UNI-PAC drum core power inductor, 100 uH ±20%, 0.47 A Irms, Isat 0.53 A, DCR 1110 mOhm.
    • Product Details
    • Download

    Eaton UP1B-101-R 100 uH UNI-PAC Power Inductor

    UP1B-101-R at a glance: UNI-PAC drum core power inductor, 100 uH ±20%, 0.47 A Irms, Isat 0.53 A, DCR 1110 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberUP1B-101-R
    Rated inductance100 uH ±20%
    OCL (open circuit inductance)113 uH ±20%
    Irms (40 °C rise, no core loss)0.47 A
    Isat (peak, rolloff per data sheet)0.53 A
    DCR typical @ +20 °C1110 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Dimensions and Pad Layout

    UP1B-101-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Drum core parts are the traditional answer to “I need a few microhenry at a few amps and I do not want to pay for a shielded part”. The open magnetic path gives a soft saturation curve, so the inductance falls away gradually rather than collapsing at the knee.

    Copper loss at the 0.47 A rating is about 0.245 W with the typical DCR of 1110 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 14 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP1B family this is value 14 of 17, in a range from 0.47 to 330 uH.

    Where This Series Fits

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products