Eaton UP2.8B-6R8-R 6.73 uH SMT Drum Core Choke, Isat 3.2 A
Eaton UP2.8B-6R8-R 6.73 uH SMT Drum Core Choke, Isat 3.2 A

Eaton UP2.8B-6R8-R 6.73 uH SMT Drum Core Choke, Isat 3.2 A

Share
UP2.8B-6R8-R: UNI-PAC drum core power inductor, 6.73 uH ±20%, 2.4 A Irms, Isat 3.2 A, DCR 67 mOhm.
    • Product Details
    • Download

    Eaton UP2.8B-6R8-R 6.73 uH SMT Drum Core Choke, Isat 3.2 A

    UP2.8B-6R8-R at a glance: UNI-PAC drum core power inductor, 6.73 uH ±20%, 2.4 A Irms, Isat 3.2 A, DCR 67 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberUP2.8B-6R8-R
    OCL (open circuit inductance)6.73 uH ±20%
    Irms (40 °C rise, no core loss)2.4 A
    Isat (peak, rolloff per data sheet)3.2 A
    DCR typical @ +20 °C67 mOhm
    Package9.4 x 9.4 mm, 2.8 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4106

    Mechanical Dimensions & Pad Layout

    UP2.8B-6R8-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4106: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Drum core parts are the traditional answer to “I need a few microhenry at a few amps and I do not want to pay for a shielded part”. The open magnetic path gives a soft saturation curve, so the inductance falls away gradually rather than collapsing at the knee.

    Copper loss at the 2.4 A rating is about 0.386 W with the typical DCR of 67 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 34.5 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP2.8B family this is value 6 of 14, in a range from 0.98 to 150 uH.

    Where This Series Fits

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: dc-dc converters; filter inductors; signal conditioning; energy storage applications; computer and battery powered equipment.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Why is DCR quoted in ohms on some of these data sheets?
    Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message