Eaton UP2B-330-R 33 uH Drum Core Inductor, 2.1 A
Eaton UP2B-330-R 33 uH Drum Core Inductor, 2.1 A

Eaton UP2B-330-R 33 uH Drum Core Inductor, 2.1 A

Share
UP2B-330-R: UNI-PAC drum core power inductor, 33 uH ±20%, 2.1 A Irms, Isat 1.7 A, DCR 91.7 mOhm.
    • Product Details
    • Download

    Eaton UP2B-330-R 33 uH Drum Core Inductor, 2.1 A

    UP2B-330-R at a glance: UNI-PAC drum core power inductor, 33 uH ±20%, 2.1 A Irms, Isat 1.7 A, DCR 91.7 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberUP2B-330-R
    Rated inductance33 uH ±20%
    OCL (open circuit inductance)33.1 uH ±20%
    Irms (40 °C rise, no core loss)2.1 A
    Isat (peak, rolloff per data sheet)1.7 A
    DCR typical @ +20 °C91.7 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Mechanical Dimensions & Pad Layout

    UP2B-330-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    The construction is one piece – drum, winding, terminations – which is why the family reaches 1000 uH in a package a few millimetres across while staying a surface-mount part. Values below 1 uH and above 500 uH sit in the same body size.

    Copper loss at the 2.1 A rating is about 0.404 W with the typical DCR of 91.7 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 47.7 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP2B family this is value 11 of 22, in a range from 0.47 to 1000 uH.

    Series Positioning

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products