Eaton UP2B-680-R 68 uH Inductor, DCR 179 mOhm
Eaton UP2B-680-R 68 uH Inductor, DCR 179 mOhm

Eaton UP2B-680-R 68 uH Inductor, DCR 179 mOhm

Share
UP2B-680-R: UNI-PAC drum core power inductor, 68 uH ±20%, 1.5 A Irms, Isat 1.2 A, DCR 179 mOhm.
    • Product Details
    • Download

    Eaton UP2B-680-R 68 uH Inductor, DCR 179 mOhm

    UP2B-680-R at a glance: UNI-PAC drum core power inductor, 68 uH ±20%, 1.5 A Irms, Isat 1.2 A, DCR 179 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberUP2B-680-R
    Rated inductance68 uH ±20%
    OCL (open circuit inductance)68.2 uH ±20%
    Irms (40 °C rise, no core loss)1.5 A
    Isat (peak, rolloff per data sheet)1.2 A
    DCR typical @ +20 °C179 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Mechanical Drawing

    UP2B-680-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a drum core choke chosen for DC-DC converters, filters and bias supplies where the board has room and the field is not the limiting factor. Irms is the thermal limit, Isat the magnetic one, and on the higher values the core saturates long before the winding overheats.

    Copper loss at the 1.5 A rating is about 0.402 W with the typical DCR of 179 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 49 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP2B family this is value 13 of 22, in a range from 0.47 to 1000 uH.

    What This Family Is For

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products