Eaton UP2UC-330-R 33 uH Drum Core Inductor, 2.1 A
Eaton UP2UC-330-R 33 uH Drum Core Inductor, 2.1 A

Eaton UP2UC-330-R 33 uH Drum Core Inductor, 2.1 A

Share
UP2UC-330-R: UNI-PAC drum core power inductor, 33 uH ±20%, 2.1 A Irms, Isat 2 A, DCR 81.6 mOhm.
    • Product Details
    • Download

    Eaton UP2UC-330-R 33 uH Drum Core Inductor, 2.1 A

    UP2UC-330-R at a glance: UNI-PAC drum core power inductor, 33 uH ±20%, 2.1 A Irms, Isat 2 A, DCR 81.6 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberUP2UC-330-R
    OCL (open circuit inductance)33 uH ±20%
    Irms (40 °C rise, no core loss)2.1 A
    Isat (peak, rolloff per data sheet)2 A
    DCR typical @ +20 °C81.6 mOhm
    DCR maximum @ +20 °C100 mOhm
    SRF typical15 MHz
    K-factor34.1
    Package12.7 x 9.3 mm, 5.21 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4369

    Mechanical Drawing

    UP2UC-330-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4369: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A UNI-PAC drum core inductor is a wound coil on a ferrite drum with the winding brought out to two solder pads. There is no shield, so the field leaves the part along the drum axis. That is the trade: the most inductance per millimetre and per cent, paid for with a radiated field.

    Copper loss at the 2.1 A rating is about 0.36 W with the typical DCR of 81.6 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 66 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP2UC family this is value 10 of 19, in a range from 1 to 1000 uH.

    Where This Series Fits

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: desktop computer; workstations/servers; dvd players; portable power devices; base stations.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products