Eaton UP2UC-331-R 330 uH Inductor, DCR 750 mOhm
Eaton UP2UC-331-R 330 uH Inductor, DCR 750 mOhm

Eaton UP2UC-331-R 330 uH Inductor, DCR 750 mOhm

Share
UP2UC-331-R: UNI-PAC drum core power inductor, 330 uH ±20%, 0.6 A Irms, Isat 0.6 A, DCR 750 mOhm.
    • Product Details
    • Download

    Eaton UP2UC-331-R 330 uH Inductor, DCR 750 mOhm

    UP2UC-331-R at a glance: UNI-PAC drum core power inductor, 330 uH ±20%, 0.6 A Irms, Isat 0.6 A, DCR 750 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberUP2UC-331-R
    OCL (open circuit inductance)330 uH ±20%
    Irms (40 °C rise, no core loss)0.6 A
    Isat (peak, rolloff per data sheet)0.6 A
    DCR typical @ +20 °C750 mOhm
    DCR maximum @ +20 °C1020 mOhm
    SRF typical4.5 MHz
    K-factor10.8
    Package12.7 x 9.3 mm, 5.21 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4369

    Mechanical Dimensions & Pad Layout

    UP2UC-331-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4369: outline views
    with rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A UNI-PAC drum core inductor is a wound coil on a ferrite drum with the winding brought out to two solder pads. There is no shield, so the field leaves the part along the drum axis. That is the trade: the most inductance per millimetre and per cent, paid for with a radiated field.

    Copper loss at the 0.6 A rating is about 0.27 W with the typical DCR of 750 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 59.4 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP2UC family this is value 16 of 19, in a range from 1 to 1000 uH.

    Positioning in the Range

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: desktop computer; workstations/servers; dvd players; portable power devices; base stations.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products