
| Parameter | Value |
|---|---|
| Orderable part number | UP2UC-471-R |
| OCL (open circuit inductance) | 470 uH ±20% |
| Irms (40 °C rise, no core loss) | 0.5 A |
| Isat (peak, rolloff per data sheet) | 0.5 A |
| DCR typical @ +20 °C | 1188 mOhm |
| DCR maximum @ +20 °C | 1270 mOhm |
| SRF typical | 3.5 MHz |
| K-factor | 9.39 |
| Package | 12.7 x 9.3 mm, 5.21 mm high |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4369 |

Drawing reproduced from Eaton Technical Data 4369: outline views
with rated mm dimensions, pad layout and marking.
Drum core parts are the traditional answer to “I need a few microhenry at a few amps and I do not want to pay for a shielded part”. The open magnetic path gives a soft saturation curve, so the inductance falls away gradually rather than collapsing at the knee.
Copper loss at the 0.5 A rating is about 0.297 W with the typical DCR of 1188 mOhm. Ripple current adds to that through the AC resistance.
The core holds about 58.8 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.
Within the UP2UC family this is value 17 of 19, in a range from 1 to 1000 uH.
The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.
Why is DCR quoted in ohms on some of these data sheets?
Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.
Is the saturation current defined at 20 % or 30 % rolloff?
It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.
Why is DCR quoted in ohms on some of these data sheets?
Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd