Eaton UP3B-151-R 150 uH SMT Drum Core Choke, Isat 1.4 A
Eaton UP3B-151-R 150 uH SMT Drum Core Choke, Isat 1.4 A

Eaton UP3B-151-R 150 uH SMT Drum Core Choke, Isat 1.4 A

Share
UP3B-151-R: UNI-PAC drum core power inductor, 150 uH ±20%, 1.2 A Irms, Isat 1.4 A, DCR 296 mOhm.
    • Product Details
    • Download

    Eaton UP3B-151-R 150 uH SMT Drum Core Choke, Isat 1.4 A

    UP3B-151-R at a glance: UNI-PAC drum core power inductor, 150 uH ±20%, 1.2 A Irms, Isat 1.4 A, DCR 296 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberUP3B-151-R
    Rated inductance150 uH ±20%
    OCL (open circuit inductance)153 uH ±20%
    Irms (40 °C rise, no core loss)1.2 A
    Isat (peak, rolloff per data sheet)1.4 A
    DCR typical @ +20 °C296 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Outline Drawing

    UP3B-151-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A UNI-PAC drum core inductor is a wound coil on a ferrite drum with the winding brought out to two solder pads. There is no shield, so the field leaves the part along the drum axis. That is the trade: the most inductance per millimetre and per cent, paid for with a radiated field.

    Copper loss at the 1.2 A rating is about 0.426 W with the typical DCR of 296 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 147 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP3B family this is value 15 of 16, in a range from 0.47 to 330 uH.

    Where This Series Fits

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products