Eaton UP3B-3R3-R 3.3 uH UNI-PAC Power Inductor
Eaton UP3B-3R3-R 3.3 uH UNI-PAC Power Inductor

Eaton UP3B-3R3-R 3.3 uH UNI-PAC Power Inductor

Share
UP3B-3R3-R: UNI-PAC drum core power inductor, 3.3 uH ±20%, 8 A Irms, Isat 9.3 A, DCR 8.3 mOhm.
    • Product Details
    • Download

    Eaton UP3B-3R3-R 3.3 uH UNI-PAC Power Inductor

    UP3B-3R3-R at a glance: UNI-PAC drum core power inductor, 3.3 uH ±20%, 8 A Irms, Isat 9.3 A, DCR 8.3 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberUP3B-3R3-R
    Rated inductance3.3 uH ±20%
    OCL (open circuit inductance)3.96 uH ±20%
    Irms (40 °C rise, no core loss)8 A
    Isat (peak, rolloff per data sheet)9.3 A
    DCR typical @ +20 °C8.3 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Mechanical Dimensions & Pad Layout

    UP3B-3R3-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A UNI-PAC drum core inductor is a wound coil on a ferrite drum with the winding brought out to two solder pads. There is no shield, so the field leaves the part along the drum axis. That is the trade: the most inductance per millimetre and per cent, paid for with a radiated field.

    Copper loss at the 8 A rating is about 0.531 W with the typical DCR of 8.3 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 143 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP3B family this is value 5 of 16, in a range from 0.47 to 330 uH.

    Positioning in the Range

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Why is DCR quoted in ohms on some of these data sheets?
    Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products