Eaton UP3B-680-R 68 uH UNI-PAC Power Inductor
Eaton UP3B-680-R 68 uH UNI-PAC Power Inductor

Eaton UP3B-680-R 68 uH UNI-PAC Power Inductor

Share
UP3B-680-R: UNI-PAC drum core power inductor, 68 uH ±20%, 1.6 A Irms, Isat 2 A, DCR 156 mOhm.
    • Product Details
    • Download

    Eaton UP3B-680-R 68 uH UNI-PAC Power Inductor

    UP3B-680-R at a glance: UNI-PAC drum core power inductor, 68 uH ±20%, 1.6 A Irms, Isat 2 A, DCR 156 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberUP3B-680-R
    Rated inductance68 uH ±20%
    OCL (open circuit inductance)69.5 uH ±20%
    Irms (40 °C rise, no core loss)1.6 A
    Isat (peak, rolloff per data sheet)2 A
    DCR typical @ +20 °C156 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Outline Drawing

    UP3B-680-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The construction is one piece – drum, winding, terminations – which is why the family reaches 1000 uH in a package a few millimetres across while staying a surface-mount part. Values below 1 uH and above 500 uH sit in the same body size.

    Copper loss at the 1.6 A rating is about 0.399 W with the typical DCR of 156 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 136 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP3B family this is value 13 of 16, in a range from 0.47 to 330 uH.

    What This Family Is For

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message