Eaton UP5-101-R 100 uH Inductor, DCR 190 mOhm
Eaton UP5-101-R 100 uH Inductor, DCR 190 mOhm

Eaton UP5-101-R 100 uH Inductor, DCR 190 mOhm

Share
UP5-101-R: UNI-PAC drum core power inductor, 100 uH ±20%, 1.8 A Irms, Isat 3 A, DCR 190 mOhm.
    • Product Details
    • Download

    Eaton UP5-101-R 100 uH Inductor, DCR 190 mOhm

    UP5-101-R at a glance: UNI-PAC drum core power inductor, 100 uH ±20%, 1.8 A Irms, Isat 3 A, DCR 190 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberUP5-101-R
    OCL (open circuit inductance)100 uH ±20%
    Irms (40 °C rise, no core loss)1.8 A
    Isat (peak, rolloff per data sheet)3 A
    DCR typical @ +20 °C190 mOhm
    SRF typical5.7 MHz
    K-factor7.98
    Package18.54 x 15.24 mm, 7.11 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4409

    Mechanical Drawing

    UP5-101-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4409: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The construction is one piece – drum, winding, terminations – which is why the family reaches 1000 uH in a package a few millimetres across while staying a surface-mount part. Values below 1 uH and above 500 uH sit in the same body size.

    Copper loss at the 1.8 A rating is about 0.616 W with the typical DCR of 190 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 450 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP5 family this is value 12 of 18, in a range from 1 to 1000 uH.

    Series Positioning

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; desktop computer; workstations/servers; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Why is DCR quoted in ohms on some of these data sheets?
    Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.

    Why is DCR quoted in ohms on some of these data sheets?
    Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products