Eaton UP5-2R2-R 2.2 uH SMT Drum Core Choke, Isat 16 A
Eaton UP5-2R2-R 2.2 uH SMT Drum Core Choke, Isat 16 A

Eaton UP5-2R2-R 2.2 uH SMT Drum Core Choke, Isat 16 A

Share
UP5-2R2-R: UNI-PAC drum core power inductor, 2.2 uH ±20%, 7.1 A Irms, Isat 16 A, DCR 14 mOhm.
    • Product Details
    • Download

    Eaton UP5-2R2-R 2.2 uH SMT Drum Core Choke, Isat 16 A

    UP5-2R2-R at a glance: UNI-PAC drum core power inductor, 2.2 uH ±20%, 7.1 A Irms, Isat 16 A, DCR 14 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberUP5-2R2-R
    OCL (open circuit inductance)2.2 uH ±20%
    Irms (40 °C rise, no core loss)7.1 A
    Isat (peak, rolloff per data sheet)16 A
    DCR typical @ +20 °C14 mOhm
    SRF typical75 MHz
    K-factor51
    Package18.54 x 15.24 mm, 7.11 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4409

    Mechanical Drawing

    UP5-2R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4409: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The construction is one piece – drum, winding, terminations – which is why the family reaches 1000 uH in a package a few millimetres across while staying a surface-mount part. Values below 1 uH and above 500 uH sit in the same body size.

    Copper loss at the 7.1 A rating is about 0.706 W with the typical DCR of 14 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 282 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP5 family this is value 3 of 18, in a range from 1 to 1000 uH.

    Positioning in the Range

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; desktop computer; workstations/servers; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products