
| Parameter | Value |
|---|---|
| Orderable part number | UP5-470-R |
| OCL (open circuit inductance) | 47 uH ±20% |
| Irms (40 °C rise, no core loss) | 2.6 A |
| Isat (peak, rolloff per data sheet) | 4.5 A |
| DCR typical @ +20 °C | 86 mOhm |
| SRF typical | 9 MHz |
| K-factor | 11.6 |
| Package | 18.54 x 15.24 mm, 7.11 mm high |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4409 |

Drawing reproduced from Eaton Technical Data 4409: outline views
with rated mm dimensions, pad layout and marking.
This is a drum core choke chosen for DC-DC converters, filters and bias supplies where the board has room and the field is not the limiting factor. Irms is the thermal limit, Isat the magnetic one, and on the higher values the core saturates long before the winding overheats.
Copper loss at the 2.6 A rating is about 0.581 W with the typical DCR of 86 mOhm. Ripple current adds to that through the AC resistance.
The core holds about 476 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.
Within the UP5 family this is value 10 of 18, in a range from 1 to 1000 uH.
The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.
Why does the inductance fall so gradually with current?
The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.
Is the saturation current defined at 20 % or 30 % rolloff?
It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.
Why does the inductance fall so gradually with current?
The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd