Eaton UP5-5R6-R 5.6 uH UNI-PAC Power Inductor
Eaton UP5-5R6-R 5.6 uH UNI-PAC Power Inductor

Eaton UP5-5R6-R 5.6 uH UNI-PAC Power Inductor

Share
UP5-5R6-R: UNI-PAC drum core power inductor, 5.6 uH ±20%, 5.3 A Irms, Isat 12 A, DCR 20 mOhm.
    • Product Details
    • Download

    Eaton UP5-5R6-R 5.6 uH UNI-PAC Power Inductor

    UP5-5R6-R at a glance: UNI-PAC drum core power inductor, 5.6 uH ±20%, 5.3 A Irms, Isat 12 A, DCR 20 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberUP5-5R6-R
    OCL (open circuit inductance)5.6 uH ±20%
    Irms (40 °C rise, no core loss)5.3 A
    Isat (peak, rolloff per data sheet)12 A
    DCR typical @ +20 °C20 mOhm
    SRF typical45 MHz
    K-factor31.6
    Package18.54 x 15.24 mm, 7.11 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4409

    Mechanical Drawing

    UP5-5R6-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4409: outline views
    with rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    The construction is one piece – drum, winding, terminations – which is why the family reaches 1000 uH in a package a few millimetres across while staying a surface-mount part. Values below 1 uH and above 500 uH sit in the same body size.

    Copper loss at the 5.3 A rating is about 0.562 W with the typical DCR of 20 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 403 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP5 family this is value 5 of 18, in a range from 1 to 1000 uH.

    Positioning in the Range

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; desktop computer; workstations/servers; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Why is DCR quoted in ohms on some of these data sheets?
    Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products