
| Parameter | Value |
|---|---|
| Orderable part number | VP1-0102-R |
| Inductance, base winding | 6.5 uH |
| Isat base | 0.8 A |
| Irms base | 0.85 A |
| R base maximum | 145 mOhm |
| Volt-time | 21.8 V-us |
| Peak energy | 1.45 uJ |
| Leakage inductance | 0.096 uH |
| Package | See dimension drawing in the data sheet |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4301 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data 4301; the package line above gives the body size where
the data sheet states it.
Configurable magnetics trade a little efficiency for flexibility: more windings in the same window means thinner wire, so the DCR is higher than a dedicated part of the same inductance.
Within the VP1 family this is item 3 of 4 in the Eaton catalogue.
The Versa-Pac range runs from a few microhenry to over a millihenry depending on how the six windings are connected, in through-hole and surface-mount bodies.
Are the ratings per winding or total?
The current ratings are per winding for the base connection stated in the table. Paralleling windings adds the currents; series connection keeps the same current but adds the inductance.
Can it be used as a transformer?
Yes, that is the point of the six-winding construction. The turns ratio is set by how many windings you put in series on each side, and the isolation is that of the bobbin, not a reinforced barrier.
Why is the DCR higher than a dedicated inductor?
Six windings share one window, so the wire is thinner for the same inductance. The flexibility is paid for in copper loss.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd