Eaton VP3A1V-0055-R Configurable Power Inductor
Eaton VP3A1V-0055-R Configurable Power Inductor

Eaton VP3A1V-0055-R Configurable Power Inductor

Share
VP3A1V-0055-R: configurable six-winding inductor transformer, 4.5 uH.
    • Product Details
    • Download

    Eaton VP3A1V-0055-R Configurable Power Inductor

    VP3A1V-0055-R at a glance: configurable six-winding inductor transformer, 4.5 uH.

    Key Specifications

    ParameterValue
    Orderable part numberVP3A1V-0055-R
    Inductance, base winding4.5 uH
    Isat base1.73 A
    Irms base1.47 A
    R base maximum61 mOhm
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1210

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data ELX1210; the package line above gives the body size where
    the data sheet states it.

    How to Read These Ratings

    Versa-Pac parts are built for prototyping and for designs that need several different magnetics on one board: the same footprint can be a 10 uH inductor at full current or a 1:1 transformer, depending on how the six windings are wired.

    Within the VP3A1V family this is item 2 of 4 in the Eaton catalogue.

    What This Family Is For

    The Versa-Pac range runs from a few microhenry to over a millihenry depending on how the six windings are connected, in through-hole and surface-mount bodies.

    • Ratings depend on the winding configuration. Use the table for the connection you actually build.
    • Typical applications: motion controls; robotics; iot, 5g,; amrs (meter readers); dc-dc converters.
    • Design note: write the winding connection on the schematic, otherwise the BOM does not define the part.

    Frequently Asked Questions

    Why is the DCR higher than a dedicated inductor?
    Six windings share one window, so the wire is thinner for the same inductance. The flexibility is paid for in copper loss.

    Why is the DCR higher than a dedicated inductor?
    Six windings share one window, so the wire is thinner for the same inductance. The flexibility is paid for in copper loss.

    Why is the DCR higher than a dedicated inductor?
    Six windings share one window, so the wire is thinner for the same inductance. The flexibility is paid for in copper loss.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message