Eaton WCL2520-1R5-R 1.5 uH Chip Inductor, Q 12
Eaton WCL2520-1R5-R 1.5 uH Chip Inductor, Q 12

Eaton WCL2520-1R5-R 1.5 uH Chip Inductor, Q 12

Share
WCL2520-1R5-R: wire wound chip inductor, 1.5 uH ±5%, Q 12 at 7.96 MHz, 400 mA rated, DCR 850 mOhm.
    • Product Details
    • Download

    Eaton WCL2520-1R5-R 1.5 uH Chip Inductor, Q 12

    WCL2520-1R5-R at a glance: wire wound chip inductor, 1.5 uH ±5%, Q 12 at 7.96 MHz, 400 mA rated, DCR 850 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberWCL2520-1R5-R
    OCL1.5 uH ±5%
    Q minimum @ test frequency12 @ 7.96 MHz
    SRF minimum230 MHz
    DCR maximum @ +25 °C850 mOhm
    Rated current (20 °C rise)400 mA
    OCL test frequency7.96 MHz
    OCL test voltage500 mV
    Package2.92 x 2.79 mm, 2.10 mm high
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10930

    Mechanical Dimensions & Pad Layout

    WCL2520-1R5-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10930: outline views
    with rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A wire wound chip inductor is a coil wound on a ceramic or ferrite core with metal end terminals, in a body the size of a resistor. Compared with a multilayer chip of the same size it gives a higher Q and a tighter tolerance, which is why it appears in filters and matching networks rather than only in supply decoupling.

    At the 400 mA rating the winding drops about 340 mV and dissipates 136 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 12 at 7.96 MHz with self-resonance at 230 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCL2520 family this is value 8 of 33, in a range from 0.12 to 220 uH.

    Positioning in the Range

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: industrial connectivity (iot); computing/gaming consoles; smart meters; industrial equipment; machine-to-machine (m2m).
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    What happens above the self-resonant frequency?
    The winding capacitance dominates and the part behaves capacitively. Keep the working band, and the harmonics that carry energy, below SRF.

    Can I place it with a standard chip shooter?
    Yes, the body and terminals are dimensioned for tape and reel and standard nozzle placement. Check the terminal width against the pad geometry in the drawing.

    How is Q specified?
    At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products